IndianOil offers 2600 Scholarships for Students of 10+/ITI, Engineering, MBBS and MBA courses on merit-cum-means basis

Criterion for selection will be merit and family's income

Wards of the employees of IOCL, its joint venture and subsidiary
companies and consultant managing the scheme (presently M/s ACE
Consultants) are not eligible to apply

Age Limit: Minimum 15 years and maximum 30 years as on 03rd July, 2012

Persons born between 03rd July, 1982 and 03rd July, 1997 (both days
inclusive) are eligible to apply

Reservation: Relaxation in the upper age limit is 3 years for OBC
candidates, 5 years for SC/ST candidates and 10 years for PwD

50% of the scholarships are reserved for SC/ST/OBC candidates

In each stream/category, 25% of scholarships for girl candidates and
10% for PwD (minimum 40% disability as per definition under
disabilities act 1952) are reserved

For more details, please log on to http://www.eonlineapply.com,
http://www.iocl.com

Scheme of LIC Golden Jubilee Scholarship 2012

How to apply

Only online applications are to be submitted through the link on the home

Once online application is submitted, the candidate will get
acknowledgement at the email ID provided by him in his online
application

Further correspondence will be made by the Divisional Office which is
mentioned in the acknowledgement mail

The candidate should ensure to submit his correct email ID and contact
number for communication at a later date, if required

Bank account details and IFSC code are not compulsory at this stage

Last date for online application is 31st August, 2012

read more http://www.successcds.net/Scholarships/lic-golden-jubilee-scholarship-scheme.html

Maharashtra State Power Generation Company Limited (MAHAGENCO) to Recruit 444 Junior Engineers - 178 Sub Engineers 2012

Junior Engineer (Tech-1); SC 02; ST 65; VJ(A) 26; NT(B) 02; NT(C) 14;
NT(D) 05; Open 330; Total 444

Sub Engineer (Tech-2); SC 29; ST 04; VJ(A) 03; NT(B) 02; NT(C) 02;
NT(D) 02; OBC 31; Open 105; Total 178

The online registration/application facility would be available up to
16th September, 2012

HOW TO APPLY
Application Form

The application should be submitted on line on website

www.mahagenco.in

by 16th September, 2012 and simultaneously the print out of
application along with attested copy of testimonials, should be sent
to Post Box Number 8712, Andheri (East) Mumbai 400069 on or before
22nd September, 2012

Applications duly filled in with attested copies of certificates in
support of age, qualifications experience and caste should be on or
before 22nd September, 2012

Applications received after due date (for whatsoever reason) shall not
be entertained

Separate application in a separate envelope is required to be
submitted for each post applied

Candidate should keep one copy of application form with him

reader more at http://www.successcds.net/Career/mahagenco-to-recruit-junior-engineers-subengineers.html

Ph.D Admission Notice 2012 for Ravenshaw University ,Cuttack

Ravenshaw University Cuttack 
Ph.D Admission Notice 2012

Admission Notice-2012

Ph.D Programme Admission-2012

All applicants should have a valid email ID before applying online for admission into Ph.D programmes

Ph.D: The University offers Ph.D programme in the following subjects

Applied Geography, Biotechnology, Botany, Chemistry, Commerce, Economics, Education, English, Geology, Hindi, History, Management, Mathematics, Odia, Philosophy, Physics, Political Science, Psychology, Sociology and Zoology

Eligibility: Postgraduate degree with at least 55% (50% in case of SC/ST candidates) marks in aggregate or CGPA of 5.5 (5 in case of SC/ST candidates)

The following candidates are exempted from the written entrance test

Candidates who have qualified UGC-CSIR NET / GATE / SLET / DBT / ICMR / ICAR / INSPIRE fellowships and teacher fellowship holders

Important Dates

Last date of online application: 29th August, 2012

Last date of submission of form (hard copy): 01st September, 2012

Date of written entrance test: 02nd September, 2012, 02.00 p.m. to 04.00 p.m.

Date of publication of written entrance test result: 20th September, 2012

Date of viva voce test: 27th September, 2012

Date of publication of final result: 30th September, 2012

complete details at 

http://www.successcds.net/Admission-Notification/ravenshaw-university-cuttack-phd-admission.html

M.Ed. Admission Notice for Punjab Self Financed Colleges 2012

Eligibility Conditions: The admission to M.Ed course (regular 1 year) session 2012-13 would have following criteria of eligibility

Eligibility for entrance test is 55% in B.Ed (50% in case of SC/ST/BC candidates)

Qualifying marks for entrance test are 20% (15% in case of SC/ST/BC and blind candidates)

Eligibility criteria for NRI quota seats shall be as per rules and regulations of Panjab University, Chandigarh

Online Registration: Student shall log on to www.medpunjab.org

Important Dates

Online submission of applications and choice filling by paying non-refundable counselling fees Rs 1000/- for general category and Rs 500/- for SC/ST category through AXIS Bank/HDFC Bank or by e-cash coupon available in colleges: 18th August, 2012, to 25th August, 2012 (bank time)

Declaration of provisional merit list: 27th August, 2012, 11.00 a.m.

Removal of discrepancy and editing of forms: 28th August, 2012, 04.00 p.m.

Declaration of final merit result: 29th August, 2012, 11.00 a.m.

Result declaration and allotment of seats: 30th August, 2012, 11.00 a.m.

Reporting in the allotted college: 30th August, 2012 to 01st September, 2012

Reporting by the college regarding vacant seats: 04th September, 2012

Result declaration of 2nd phase counseling: 05th September, 2012, 11.00 a.m.

Reporting in the allotted college: 05th September, 2012 to 08th September, 2012

read  more at 

http://www.successcds.net/Admission-Notification/punjab-self-financed-colleges-med-admission.html

Times Scholarship for Class XII Students 2012 worth Rs 5 lakh each

TOI invites Class XII students to test their excellence and take home scholarships worth Rs 5 lakh each

Times Scholars is an initiative by the Times of India to recognize and reward the brightest young minds in the country

Invite students of class XII from all over the country to apply for the programme by filling out a simple form on website

 www.timesscholars.com

http://timesofindia.indiatimes.com/timesscholar.cms

Students will be shortlisted based on information given by them in the form, and the shortlisted candidates will go through the next levels of testing

Eligibility: Students currently studying in Class XII of any school in India

read more at 

http://www.successcds.net/Scholarships/times-scholarship-for-class-xii-students.html

Young Professional Programme (UN Civil Services) Examination 2012

The United Nations (UN) in collaboration with the Ministry of External Affairs and Indian Council for Cultural Relations (ICCR) is conducting the the Young Professional Programme (UN Civil Services) Examination 2012, a recruitment initiative that brings new talent to the United Nations through an annual entrance examination.

The examination is open to Indian Nationals for the first time after many years (It is a great opportunity for Indian Job Seekers). For young, high-calibre professionals, the programme is a plateform for launcvhing a career at the United Nations.  Applications from women are strongly encouraged.

Qualification :

32 years as on 31/12/2012
Bachelor's or Master's University Degree in the subject related to the job family that you are applying to
 Fluent in English or French

This year the examination is offered to candidates with academic background in :

Architecture
Economic Affairs
Information System and Technology
Political Affairs
Radio Producer (Kiswahili/ Portuguese)
Social Affairs

The YPP Examination will be held on 05/12/2012 in New Delhi

How to Apply : Apply Online at UN Career website on or before 12/09/2012 only.

Please visit 

http://careers.un.org/YPP 

website for all the details and to apply Online.

Common Entrance Examination for Design (CEED) Admission-2013

Admission Notice-2013
CEED Admission-2013
Common Entrance Examination for Design (CEED) Admission-2013


What is CEED ?


CEED (Common Entrance Examination for Design) is an all India
examination - a Qualifying Examination for Admission to Master of
Design (M.Des.) Programmes at IISc Bangalore, IIT Bombay, IIT Delhi,
IIT Guwahati and IIT Kanpur, and Ph.D. Programmes in Design in some
Institutes, for the Academic Year 2013- 2014

Eligibility

Candidates must either have completed or be expecting to complete any
of the following, by July, 2013

Bachelor's degree in Engineering/Architecture/Design/Interior Design
or equivalent (4 years duration after 10+2)

Professional Diploma in Design (NID/CEPT or equivalent of 4 years
duration after 10+2)

BFA (4 year professional programme, after 10+2)

G.D. Art (5 year programme after 10th) with one year post
qualification, professional experience

Master's degree in Arts/Science/Computer Applications

The candidate is responsible for showing eligibility while seeking
admission to the specific programme in which they are interested

There is no age limit and a candidate can appear in CEED any number of times

ber, 2012 with a fee of Rs 400/- to be paid in the form of demand
draft in favor of IIT Bombay

Information on the programme may be obtained from the websites of the
respective institutes, as given
Below

IISc Bangalore, CPDM, http://www.cpdm.iisc.ernet.in

IIT Bombay, IDC, http://www.idc.iitb.ac.in

IIT Delhi, IDDC, http://iddcweb.iitd.ac.in

IIT Guwahati, DOD, http://www.iitg.ac.in/design

IIT Kanpur, Design Programme, http://www.iitk.ac.in/design

How to apply: The instructions and other information regarding filling
online application are given on the website
www.gate.iitb.ac.in/ceed2013

Please read them carefully

The applicant has to upload photo, signature and other documents

They need not have to send any hard copy
Important Dates

Access to application through website: 06th August, 2012 to 31st August, 2012

Last date for submitting of application (website closure): 31st
August, 2012, Friday

Admit card can be downloaded from: 02nd November, 2012, Thursday

Date of examination: 25th November, 2012, Sunday, 0900 to 1200 hours

Announcement of results: 26th December, 2012, Thursday

Engineering Counseling 2012 :Notification on 20th August for EAMCET

EAMCET Engineering Counseling 2012 Notification on 20th August

The EAMCET 2012 Counseling schedule for Engineering admissions has been announced by APSCHE, Andhra Pradesh. The counseling dates have been released by the authorities after the AP High Court asked the Government to fix the dates and resolve the fee issue. As per the schedule, the certificate verification will start from 27th August 2012. Following are details of certificate verification, exercise of web options, allotment of seats and start of classes for Engineering stream and second phase counseling.

EAMCET 2012 counseling notification will be released on 20th August 2012. The certificate verification will start from 27th of August 2012. The exercise of web options through internet will commence from 2nd September 2012. The Engineering seat allotments will be announced on 7th September 2012 and class work will start from 12th September 2012.

The counseling process will involve Following stages:
1) Certificate Verification
2) Exercise of Web Options
3) Seat Allotment
4) Payment of fee
5) Download Allotment Order
6) Reporting at the College
7) Attending to Classes

There will be a second phase counseling if the seats remain vacant after the first phase counseling. If the candidates do not like to join in allotted Engineering college, he need not report in the college and may participate in Second Phase Counseling. More details will be updates here regularly. You can also see www.apeamcet.org for counseling information.

Read more: http://www.apcollegeadmissions.com/2012/08/eamcet-engineering-counseling-2012.html#ixzz23XYKxG9W

Get Rs. 1000 off on air tickets with Standard Chartered credit cards.

If you're having trouble viewing this email, please click here.

It's good to have Credit Cards that add more to your life

Plan your vacation using Standard Chartered Credit cards and avail a flat discount of Rs.1000 on round trip and Rs.500 on one-way Domestic flights. Enjoy a host of exciting offers on dining, entertainment, travel, and more. Choose from a range of Credits Cards to suit your needs.

Super Value Titanium Credit Card For the value conscious and smart saver 5% Cash Back on Fuel across all petrol pumps. 5% Cash Back on all telecom payments including phone bills. 5% Cash Back on all utility bill payments. Special offer: 1st Year Free

Platinum Rewards Credit Card A great card to accumulate top rewards Get the best in class rewards at hotels, dining outlets and more locally and overseas. Great Rewards: Earn 5X rewards on hotels, dining & fuel, and 2X rewards on other categories. Enjoy unmatched offers on holidays, golfing retreats, movie tickets, dining and more. Special offer for online application: Lifetime Free

Manhattan Platinum Credit Card A shopper's delight Get 5% Cash Back every time you shop at supermarkets and departmental stores. Earn 5 reward points for every Rs.100 spent anywhere else Special offer: 1st Year Free

*Terms & conditions apply. This offer is valid till 30th September 2012. Standard chartered can extend the offer at its sole discretion. Flat discount can be availed for all tickets booked on goibibo.com Standard Chartered Bank reserves the right to ask for any additional documents from the applicant. Standard Chartered Bank shall be entitled to, at its sole discretion, at any time, amend the terms and conditions and all such amendments shall be conclusive and binding on the customer.

You have received this mailer from us because you indicated that you would like to receive special offers.
To unsubscribe from this offer, please click here to unsubscribe.
Our office is located at 221, Okhla Industrial Estate III, New Delhi 110020.

GATE 2013 Notification :GATE 2013 Important Dates

GATE 2013 Important Dates


GATE online applicant interface (website) opens: 01st September, 2012, Saturday
Last date for submission of online application (website closure): 30th
September, 2012, Sunday, 23.00 hours
Last date for the receipt of printed version of online application at
the respective zonal GATE office: 08th October, 2012, Monday
Last date for request of change of city: 20th November, 2012, Tuesday
Availability of admit card on online application interface: 05th
December, 2012, Wednesday
GATE-2013 online examination for papers (AR, CE, GG, MA, MT, PH and
TF): 20th January, 2013, Sunday, 09.00 hours to 12.00 hours
GATE-2013 online examination papers (AE, AG, BT, CH, CY, MN, XE and
XL): 20th January, 2013, Sunday, 14.00 hours to 17.00 hours
GATE-2013 offline examination papers (CS, ME and PI): 10th February,
2013, Sunday, 09.00 hours to 12.00 hours
GATE-2013 offline examination papers (EC, EE and IN): 10th February,
2013, Sunday, 14.00 hours to 17.00 hours
Announcement of GATE 2013 results on online applicant interface: 15th
March, 2013, Friday, 10.00 hours
GATE 2013 ADMIT CARD

Admit Card: Admit cards are not sent by mail anymore
Admit cards can only be downloaded from the zonal GATE websites from
05th December, 2012 onwards
Bring the admit card to the test center along with at least one
original (not photocopied/scanned copy) and valid (not expired) photo
identification
GATE 2013 PATTERN

The examination for the papers with codes AE, AG, AR, GG, MN and TF
will be carried out ONLINE using computers where the candidates will
be required to enter the answer for each question using mouse. For all
other papers, the candidates will have to mark the correct choice on
an Optical Response Sheet (ORS) by darkening the appropriate bubble
against each question.
In the ONLINE papers, the question paper will consist of questions of
multiple choice type and numerical answer type. For multiple choice
type questions, each question will have four choices for the answer.
For numerical answer type questions, each question will have a number
as the answer and choices will not be given.
GATE 2013 would contain questions of four different types in various papers:
Multiple choice questions carrying 1 or 2 marks each.
Common data questions, where two successive questions use the same set
of input data.
Linked answer questions, where the answer to the first question of the
pair is required in order to answer its successor.
Numerical answer questions, where the answer is a number, to be
entered by the candidate.
Examples of such questions can be found in Question Types.
In all the papers, there will be a total of 65 questions carrying 100
marks, out of which 10 questions carrying 15 marks in General Aptitude
(GA) are compulsory.
In the papers bearing the codes AE, AG, BT, CE, CH, CS, EC, EE, GG,
IN, ME, MN, MT, PI, TF and XE, the Engineering Mathematics will carry
15 % of the total marks, the General Aptitude section will carry 15 %
of the total marks and the remaining 70 % of the total marks is
devoted to the subject of the paper.
In the papers bearing the codes AR, CY, GG, MA, PH and XL, the General
Aptitude section will carry 15 % of the total marks and the remaining
85 % of the total marks is devoted to the subject of the paper.

read more at
source:http://www.successcds.net/engineeringentranceexam/GATE/Graduate-Aptitude-Test-in-Engineering.htm#apply

Ph.D Programme Admission-2012:Anna University, Chennai

Educational Qualifications
Educational Qualifications:-
Ph.D degree in Engineering/Technology: M.E./M.Tech/M.S. (by research)
in the relevant branch of Engineering or Technology

Ph.D degree in Science and Humanities: M.Sc/M.A. (English)/M.S. (by
research) in the relevant branch of Science and Humanities/MCA

Ph.D degree in Management Sciences: MBA/Post Graduate Diploma in
Business Management or Administration awarded by Indian Institute of
Managements (IIMs)/M.S. (by research) in Management Sciences

Ph.D degree in Architecture and Planning: M.Arch/M.Plan/M.S. (by
research) in Architecture and Planning

Selection Procedure: Selection to the research programme (Part
Time/Full Time) will be based on the performance in the written test
cum interview

Candidates who have been awarded INSPIRE Fellowship of DST, Rajiv
Gandhi and Maulana Azad Fellowships of UGC or similar Fellowships
awarded by statutory bodies of Govt of India are exempted from written
test and they have to appear for the interview only for admission to
Ph.D programme

Registration Fee: Duly filled in application shall accompany with
registration fee of Rs 600/- for general category and Rs 300/- for
Tamil Nadu SC/ST candidates in the form of a demand draft obtained
from any Nationalized Bank drawn in favour of the Director (Research),
Anna University payable at Chennai drawn on or after 06th August, 2012

Important Dates

Downloading of application from the website: 06th August, 2012 onwards

Last date for submission of completed application: 25th August, 2012

for complete details visit
:http://www.successcds.net/Admission-Notification/anna-university-chennai-phd-admission.html
or Website www.annauniv.edu/

All about Common Proficiency Test (CA CPT) scrapped by ICAI

Common Proficiency Test (CA CPT) scrapped by ICAI


The The Institute of Chartered Accountants of India (ICAI) has
scrapped the Common Proficiency Test (CPT) and reverted to its old
scheme of allowing graduates and post-graduates join the CA course
without appearing for the entrance test.This change has been effected
from August 1 as reported by the Hindu Businessline

For complete details please click here

http://www.successcds.net/CA-CPT/icai-scraps-common-proficiency-test.html

Edu News :APPSC Assistant Engineers Syllabus (Civil/Mechanical/Electrical)

APPSC Assistant Engineers Syllabus (Civil/Mechanical/Electrical)

PAPER-1 GENERAL STUDIES

● General Science
● Current Events of National and International Importance.
● History of India and Indian National Movement. India and World Geography.
● General Mental Ability.

Questions on General Science will cover General appreciation and understanding of science including matters of every day observation and experience, as may be expected of a well educated person who has not made a special study of any particular scientific discipline. In current events, knowledge of significant national and international events will be tested. In History of India, emphasis will be on broad general understanding of the subject in its social, economic and political aspects. Questions on Indian National Movement will relate to the nature and character of the nineteenth century resurgence, growth of Nationalism and attainment of independence. In geography emphasis will be on geography of India. Questions on geography of India will relate to physical, social and economic geography of the country, including the main features of the Indian agricultural and natural resources. On general mental ability, the candidates will be tested on reasoning and analytical abilities.

DISASTER MANAGEMENT (Source : CBSE Publications)
1. Concepts in disaster management and vulnerability profile of India / State of A.P.
2. Earth quakes / Cyclones / Tsunami / Floods / Drought – causes and effects.
3. Man made disasters - Prevention strategies.
4. Mitigation strategies / Mitigation measures.

PAPER-2: (COMMON FOR CIVIL / MECHANICAL)

SOLID MECHANICS:
Forces: Different types of forces, gravitational, frictional, axial, tensile or compressive. Law of Parallelogram and triangle of forces, polygon of forces, problems.

Friction: Statical friction, limiting friction, simple problems.
Centre of gravity and moment of inertia. Simple plane figures.
Simple machines, law of machine, Mechanical advantage, velocity ratio and efficiency, wheel and axle, pulleys and simple screw jack-problems

Simple Stresses and strailns: Different types of stresses and strains, stress-strain diagram for ductile materials. Factor of safety, ultimate strength and working strength, elastic constants, poisson ratio. Deformations, volume changes. Relations between elastic constants. Hooke's Law. Compound rods, temperature stresses, strain energy, proof resiliance, impact loading.

Riveted and welded joints, different modes of failures, efficiency of joints, thin cylindrical shells, longitudinal and circumferential stresses and volume changes.

Shear force and bending moment diagrams for simply supported, over hanging and cantilever beams. Relation between intensity of loading, shear force and bending moment. Economical length of overhanging beams.

Theory of simple bending: Assumptions, basic flexure formula, bending stresses, modulus of section, moment of resistance. Circular bending. Distribution of shear stress in common structural sections.

Deflection in cantilever and simply supported beams under simple loading-propped cantilever beams subjected to simple loading, determination of reaction. SF and BM diagrams.

Torsion: Assumptions, basic formula of torsion, power transmission by shafts of uniform circular sections close-coiled springs, strain-energy in simple beams and shafts, sudden and impact loading. Principal stresses and principal planes. Moher's circle of stress.

Thin cylinders under internal pressure stresses and volume changes.

Columns and struts: Direct and bending stresses, core of section. Short and long columns under axial loading-various end-conditions. Euler and Rankine formulae, Slenderness ratio, simple built-up columns.

Simple plane and pin-jointed trusses: Stresses by method of joints and method of sections.

FLUID MECHANICS:
Introduction: Scope of hydraulics in Engineering. Definition and properties of fluid.

Fluid pressure and its measurement: Atmospheric pressure, Gauge pressure and absolute pressure. Piezometer, Manometer-U-tube, Inverted U-tube, and differential manometers. 

Pressure on plane surface immersed in liquid-Horizontal, vertical and inclined plane surface.

Flow of fluids: Type of flow-uniform flow, non-uniform flow, streamline flow, Turbulant flow, steady flow and unsteady flow, Energies in fluid motion-Datum head, pressure head and velocity head. Total energy of fluid in motion - Bernoulli's theorem. Practical application of Bernoulli's theorem - pitot tube venturimeter - Orificemeter - problems.

Flow through orifices and Mouth Pieces: Definition of orifice, types of orifices, Vena contracta, coefficient of velocity, coefficient of contraction, coefficient of discharge. Submerged and partially submerged orifices. Flow through orifices under variable heads - Time of emptying a rectangular tank through orifices. Mouth pieces - different types of problems.

Notches and Weirs: Definition of notch, types of notches - Rectangular notch, Tringular notch and trapezoidal notch. Discharge over a rectangular, triangular and a trapezoidal notches.

Flow through pipes: Major and minor losses - Loss of head at entrance, loss of head due to sudden enlargement, due to sudden contraction, loss of head at exit of the pipe. Frictional loss in pipe-Chezy formula and Daycy's formula.

Hydraulic gradient and total energy line. Discharge through parallel pipes and branched pipes connected to a reservoir. Flow through syphon pipe.

Hydraulic transmission of power-flow through nozzle at the end of a pipe line-diameter of nozzle for Max H.P. available. Water hammer and its effect. Laminar and turbulent flow in pipes-Critical velocity and Reynold number.

Measurements: Measurement of velocity - Current meter surface floats and weighted rods. Determination of discharge from velocity readings.

Impact of jets: Formulae for the force of jet on a fixed vertical flat plate, fixed inclined flat plates, moving flat plates, series of flat plates fixed on the rim of a wheel. Force of jet striking at the centre and at the top of a fixed curved blade and moving curved blade, velocity triangles. Work done, power and efficiency in the above cases. Simple problems. Water turbines: Introduction to water turbines. Use of water turbines in Hydroelectric power stations line sketch showing layout of hydro-electric power plant with head race, dam, sluice gate, pen stock turbine, generator and tail race. Classification of turbines - impulse and reaction turbines brief subclassification of axial, radial and tangential flow type. Pelton wheel, Francis turbine and Kaplan turbine, Governing of waster turbines. Simple problems on power and efficiency. 

Centrifugal pump: Installation, mountings and other accessories. Priming of centrifugal pump. Efficiency, cavitation. Simple problems on work, power and efficiency.

PAPER-2: ELECTRICAL ENGINEERING

Ohms's law and DC circuits. Power & Energy, Kirchoff's laws, Thevinin's theorem, Norton's theorem, Superposition theorem, Star & Delta transformations, Faraday's laws, Fleming's left hand & right rules. Inductive and capacitive circuits with DC supply

Single phase AC circuits, R, L and C series and parallel circuits, phasor diagrams, Resonance, Three-phase balanced ac circuits, Star & Delta connections, Three phase power by two wattmeter method.

DC Generators, Principle of operation and construction, Lap & Wave windings, Armature reaction, Commutation, Shunt, Series and Compound generators, Characteristics, DC Motors, Characteristics and applications, Starters, Speed control, Losses in DC machines 

Transformers, Principle of operation, Three-phase transformers, Equivalent circuit, Losses and efficiency, OC and SC tests, Parallel operation, Scott connection

Single-phase Induction Motors, Construction and features, Three-phase induction motors, Rotating magnetic field, Equivalent circuit, Star-delta and Auto-transformer starters, Speed control

Alternators, Construction, Concentrated & distributed windings, E.M.F equation, Regulation, OC & SC tests, Synchronous impedance method, Synchronous motor, V and Inverted V curves, Applications

Moving coil and Moving Iron types of Ammeters and Voltmeters, Dynamometer type Wattmeter, Induction type Energy meter, Megger, Transducers – Thermocouple and Strain gauge, Ramp type digital meters

`P' and `N' type materials, PN Junction, forward and reverse bias- Zener diode, Zener diode characteristics - formation of PNP and NPN transistors- Transistor configurations- CB, CE - Input and output characteristics of CB,CE - comparison of CB,CE, configurations. SCR and Triac, V-I characteristics, Rectifiers, 1-phase & 3-phase Full converter & Semi-converter rectifiers, Choppers, Cyclo-converters, Bridge type Inverters

Thermal, Hydro, Nuclear Power stations, Load curve, load factor, maximum demand, Circuit breaker, MOCB, Over current relay, Impedance relay, Distance relay, Earth fault relay

AC & DC Transmission, Choice of frequency & voltage, Effect of voltage and % Regulation-Short line calculation of-Efficiency-Regulation-Sending end voltage-sending end p.f. for the given receiving end conditions - Medium transmission lines, Regulation-Sending end voltage-sending end p.f. for the given receiving end conditions in using Nominal pie method-Nominal T method -Vector diagrams in the above methods-Charging current in lines-Ferranti's effect - Carona in transmission lines

Primary and secondary distribution, Feeders, distribution and service mains, Classification of Distribution systems, Radial and Ring system of Distribution, A.C. Distribution - single phase, Steps in voltage drop calculation.

Electric braking, plugging of D.C.Motors and induction motor, Rheostatic braking of D.C.Motors, Regenerative braking of D.C.motors and Induction motors. Laws of illumination, Sodium vapour lamp, Mercury vapour lamp, Halogen lamp, Residential & factory lighting.Temperature control of resistance furnaces - Electric arc furnaces - direct and indirect types - Induction heating- core type and coreless type - Applications - Dielectric heating - principle and applications. Trapezoidal speed - time curve, Different types of train services, urban and sub-urban- factors affecting scheduled speed – Tractive effort -Coefficient of adhesion - factors affecting the coefficient of adhesion - Specific energy consumption

Binary, Octal. Hexadecimal numbering systems - Logic gates :AND, OR, NOT, NAND, NOR, Exclusive-OR. Boolean algebra. Demorgan's Theorems. Implementation of arithmetic circuits, Half adder, Full adder, Serial and parallel Binary adder. Parallel adder, decoder, encoder, Principle of flip-flop operation, RS, RST, JK, JK Master slave, T, D flip-flops.

Emplyment News:ONGC Graduate Trainee (GT) Recruitment 2012 Apply Online

ONGC Graduate Trainee (GT) Recruitment 2012 Apply Online

Oil and Natural Gas Corporation invites online application for 889 Posts Graduate Trainee (GT) Recruitment 2012 on it’s official main portal site www.ongcindia.com.

 

Total Number of Posts : 889

 

Post Name : Graduate Trainees-Apply online

1. Geology : 50 Posts

2. Geo Physics (Surface) : 30 Posts

3. Geo Physics (Wells) : 24 Posts

4. Chemistry : 60 Posts

5. Reservoir : 47 Posts

6. Programming : 21 Posts

7. Production : 220 Posts

8. Drilling : 110 Posts

9. Cementing : 20 Posts

10. Mechanical : 60 Posts

11. Electrical : 40 Posts

12. E & T : 45 Posts

13. Instrumentation : 30 Posts

14. Transport :11 Posts

15. Civil : 15 Posts

16. Finance and Accounts : 34 Posts

17. HR : 25 Posts

18. MM : 31 Posts

19. Medical : 7 Posts

20. Security : 9 Post

 

Education Qualifications : Candidates must have First class(60% marks) Graduation degree in Engineering/BE/B.Tech/MBBS/MBA/ICWA as per the relevant job. For further post wise eligibility criteria please refer the ONGC Notification 2012.

Pay scale: ONGC Graduate Trainee Salary, pay scale range is 24,900-50, 500 rupees

Age Limit: Candidates must have below 30 years as on 26-08-2012 for General category

5 years upper age relaxation for SC/ST Candidates

3 years relaxation in upper age for OBC Candodates

10 years for PWD Candidates for all positions, except drilling and cementing.

 

Selection Process :

ONGC GT Selection Process is based on Performance in Written exam/psychometric test and interview. The ONGC Syllabus for Graduate trainee has 3 sections, namely general awareness, specialization subject and aptitude test. Candidates must prepare as per the syllabus and download the some ONGC Graduate trainee previous year question papers ,model question papers and sample papers to get the maximum idea on the written exam.

 

How to Apply :

Now this is the time to Apply online for ONGC Graduate trainee jobs, for than you must have valid e-mail id and mobile number. ONGC Online registration form available at http://www.eonlineapply.com/ongc/Pages/index.htm, just accept the terms and conditions after reading the instructions. Fill the online application form and finally submit.

ONGC Online Registration 2012 for Graduate Trainee Recruitment

http://www.eonlineapply.com/ongc/Pages/index.htm

 

Important Dates :

Online Registration start Date : 04.08.2012

Last date for online registration/Online Application form: 26.08.2012

ONGC Admit card download option will available from : 25.09.2012

All India Written Test : 07.10.2012

Download : ONGC Graduate Trainee(GT) Recruitment 2012 Notification/Advertisement in Pdf

http://aptitude9.com/wp-content/uploads/2012/08/ONGC-GT-Recruitment-2012-Notification-1.pdf

Hall Ticket download for GROUP-IV SERVICES, GENERAL RECRUITMENT APPSC

Hall Ticket download for GROUP-IV SERVICES, GENERAL RECRUITMENT APPSC at www.apspsc.gov.in/

 

Date Of Exam : 11-AUGUST-2012 (F.N & A.N)

 

APPSC Assistant Engineers Recruitment 2012 (245 Posts)

APPSC Assistant Engineers Recruitment 2012 (245 Posts)

APPSC issued Notification (Advertisement Number 49/2011) for 245 Assistant Engineers and Municipal Assistant Engineers Vacancies. Among them 59 posts as Assistant Engineers in Andhra Pradesh Public Health & Municipal Engineering Sub Service, 35 posts as Municipal Assistant Engineers (Electrical) in Andhra Pradesh Municipal Engineering Sub-Service and 151 posts as Municipal Assistant Engineers (Civil) in Andhra Pradesh Municipal Engineering Subordinate Service. Online Application form submission started from 23-07-2012.Last date to apply online is 23-08-2012.

Total Number of posts: 245

Post Name: APPSC Assistant Engineers Recruitment 
1. Assistant Engineers: 59 Posts
2. Municipal Assistant Engineers (Electrical): 35 Posts
3. Municipal Assistant Engineers (Civil): 151 Posts

Education Qualifications Required:
B.E/B.Tech/B.Sc Engineering degree from Electrical/Civil/Mechanical engineering streams

Age Limit:
Candidates must have at least 18 years and the max age limit is 36 years as on 01-07-2012.

Application Fee:
100 rupees for Application fee and 80 rupees for Exam fee.must be paid at any AP Online center or SBI by downloading the challan form at appsc.gov.in

Important Dates:
Opening date for online registration: 23-07-2012
Closing date for online registration: 23-08-2012
Last date for fee payment: 21-08-2012
Tentative Written Test date: 23-09-2012

Download APPSC Assistant Enginers Notification 2012-Number 49/2011

All about AICTE CMAT 2012:COMMON MANAGEMENT ADMISSION TEST 2012

COMMON MANAGEMENT ADMISSION TEST (CMAT-2012)

AICTE is conducting the first National level Common Management
Admission Test (CMAT)-2012 for facilitating institutions to select
suitable students for admission in all management programmes approved
by AICTE for the year 2012-13.
AICTE has now decided to conduct CMAT twice a year

The notification is issued to announce the schedule for conducting
first test of common management admission test (CMAT) for admission to
academic year 2013-14

AICTE CMAT 2012 IMPORTANT DATES
MBA Entrance Exam Question Bank CD for Practice

Registration window opens on: 03rd August, 2012

Last date for online registration: 02nd September, 2012

Print out of Hall ticket from: 15th September, 2012

Computer based test dates: 27th September, 2012 to 01st October, 2012,
(09.30 a.m. to 12.30 p.m., 02.30 p.m. to 05.30 p.m.)

Declaration of result: 17th October, 2012

Print out of score cards from: 17th October, 2012 to 17th November, 2012

Registration: Online from 03rd August, 2012 to 02nd September, 2012 on

website www.aicte-cmat.in